1550-1620MHz 200W High Power RF Amplifier with White Noise Source Module
ZD-PA-1550/1620M-200W
This 1550-1620MHz 200W RF amplifier integrated white noise module adopts multi-octave circuit design, with typical saturated output power of 200W and Gaussian white noise as interference modulation signal. Compact and lightweight with maximum weight of 2kg, it delivers instant ultra-wideband response and standard 50 Ohm matched output. Compared with similar devices, it achieves harmonic suppression of -40dBc, spurious signals ≤-12dBc and gain flatness within ±1.5dB for superior RF performance. It supports triple protection of over-temperature, over-voltage and over-current, and automatically shuts down output when temperature exceeds 85℃. Powered by +28VDC, it operates stably from -30℃ to 55℃. Equipped with N-K RF output and D-Sub7W2 control connector with TTL enable function, it is widely used for RF performance verification and interference simulation tests.
Quantity:
This 1550-1620MHz 200W white noise module is an integrated RF signal generator, built with multi-octave high-power amplifier structure, featuring typical saturated output power of 200W, and Gaussian white noise as core modulation signal for interference output. This 1550-1620MHz white noise module features compact lightweight design with max weight of 2kg, instant ultra-wideband response and standard 50 Ohm matched output, as well as complete built-in control and protection circuits. As a high-performance signal generator, it achieves gain flatness within ±1.5dB, harmonic suppression up to -40dBc and spurious signals below -12dBc for excellent RF purity. Powered by +28VDC, it has triple protection against over-temperature, over-voltage and over-current, and auto-shuts down when temperature exceeds 85℃. It works steadily from -30℃ to 55℃, fitted with N-K RF output and D-Sub7W2 communication connector. This reliable 200W white noise module is widely applied in RF interference simulation and performance testing of electronic devices.
| Operating Frequency | 1550-1620MHz |
| RF Output Power | 200W |
| Power Gain Flatness | ±1.5dB |
| Harmonics | -12dBc |
| Spurious Signals | -40dBc |
| Output Impedance | 50Ω |
| Operating Voltage | 28V |
| DC Current | 2A |
| Load VSWR | 3:1 @ all load phase & amplitude continuous |
| Thermal Overload | 85°C ±5°C shutdown |
| Operating Temperature | -30~55°C |
| Storage Temperature | -40~65°C |
| Relative Humidity (non-condensing) | 95% |
| Weight | 2kg |
| RF Connectors Output | N-K, Female/SMA |
| DC Interface Connector | Hybrid, D-Sub7W2, Male |
