200W 10.6‑12.8GHz Built‑In Upconverter Microwave Power Amplifier Module
ZD-PA-10.6/12.8G-200W
This 10.6‑12.8GHz microwave power amplifier module integrates a built‑in upconverter to translate 5.2‑5.42GHz DDS input signals into its operating frequency band with typical 200W saturated output power. It delivers maximum 55dB gain and 20dB gain adjustment range in 0.5dB steps while gain flatness stays within 4dB. Powered by 32V DC it supports RS485 and TTL dual communication protocols for real‑time monitoring of temperature current voltage and RF output power. LED indicators clearly show output power level and equipment fault status. It adopts SMA input and N‑K RF output. Measuring 170*160*27mm and weighing 1600g it operates from ‑40℃ to +50℃ with ±1.0dB power stability and fits microwave RF test and broadband signal excitation engineering applications.
Quantity:
This10.6‑12.8GHz RF PA module is a high‑performance Ku‑band high power amplifier embedded with an integrated up‑converter. It accepts DDS input and converts 5.2‑5.42GHz signals into the 10.6‑12.8GHz operating band, eliminating external frequency conversion hardware and simplifying overall microwave system construction. This 10.6‑12.8GHz RF PA module delivers typical 200W saturated output power with 55dB maximum gain and offers 20dB wide‑range step gain adjustment to satisfy diversified signal‑excitation requirements. As a compact Ku‑band high power amplifier, it supports dual RS485 and TTL communication interfaces for real‑time monitoring of voltage current temperature and RF power. LED indicators visualize operating status and fault alerts. The direct‑coupled DDS input reduces signal‑chain loss. Equipped with SMA input and N‑K output it maintains ±1.0dB power stability across ‑40℃~+50℃. This 10.6‑12.8GHz amplifier is well‑suited for microwave testing signal excitation and RF simulation engineering projects.
| Frequency Range | 10.6-12.8GHz |
| Operating Voltage | 32V |
| Output Power | 200W |
| Output Current Range | 28-32A |
| PA Module Average Efficiency | 23% |
| Maximum Gain | 55dB |
| Gain Adjustment Range | 20dB |
| Gain Flatness | ≤4dB |
| Standard Input Power | 0dBm |
| Maximum Non-Destructive Input Power | ≤10dBm |
| Input Port VSWR | ≤2 |
| Operating Ambient Temperature | -40℃~+50℃ |
| Power Stability | ±1.0@-40℃～+55℃ |
| Power Supply Requirement | ≥35A@+32Vdc |
| Power Supply Interface | XT30PW-M*2 |
| DDC | 10.6-12.8GHz |
| Control & Communication Interface | 485 Communication Protocol TTL Communication |
| RF Output Connector | N-K |
| Indicator Function | LED Light |
| Dimensions | 170*160*27mm |
| Weight | 1600g |
