0
image
image
image
image
GaN rf power amplifier

High Power GaN RF Power Amplifier 500‑1000MHz 500W

ZD-PA-500/1000M-500W
This High Power GaN RF Power Amplifier 500‑1000MHz 500W is a multi‑octave solid‑state amplifier leveraging gallium nitride semiconductor and chip‑and‑wire assembly technology. It delivers typical 500‑watt saturated RF output power across 500‑1000 MHz, featuring wide dynamic range for modern RF system requirements. The unit adopts 50‑ohm input and output impedance matching to guarantee stable signal transmission throughout the full working band.Integrated protective hardware provides over‑temperature, over‑voltage and over‑current monitoring, enabling automatic shutdown to prevent module damage under abnormal operating conditions. It achieves 56‑57 dB power gain with ±1.5 dB gain flatness, harmonics performance down to ‑12 dBc and spurious output at ‑60 dBc. Supporting continuous operation under 3:1 load VSWR across all phase conditions, the amplifier has compact mechanical dimensions and low weight. Designed for demanding working environments, it works reliably within ‑30°C to 65°C. This amplifier is well‑suited for EMC immunity testing, signal jamming simulation and diverse test‑and‑measurement setups.
Quantity:
Contact Now
add to cart

Thissolid state high power amplifier delivers reliable RF performance for laboratory and field deployment. Built with gallium nitride and chip‑and‑wire manufacturing technology, this GaN rf power amplifier covers 500‑1000 MHz frequency band with excellent power‑to‑volume ratio. As a 500‑1000 MHz 500W rf power amplifier, it supplies wide dynamic range to satisfy complex RF test requirements.Developed as a compact high power rf amplifier module, this unit acts as a saturated output rf power amplifier 500W with typical saturated output power reaching 500 Watt. It features 50‑ohm input and output impedance matching for consistent signal transmission over the whole frequency band. Its power gain is 56‑57 dB with gain flatness of ±1.5 dB. Compared with lower‑band counterparts, this solid state high power amplifier achieves improved harmonic performance of ‑12 dBc at full power, while spurious signals maintain ‑60 dBc under saturated condition.This GaN rf power amplifier integrates complete control and multi‑level protection circuits. Automatic shutdown will trigger under over‑temperature, over‑voltage and over‑current faults. The high power rf amplifier module can continuously run with load VSWR up to 3:1 for all load phases and amplitudes, offering strong anti‑mismatch capability. The working DC voltage ranges 24‑32 VDC and typical power‑added efficiency is 30%.Physical dimension measures 215×150×25 mm with maximum weight of 3 kg. It can operate stably from ‑30 °C to 65 °C under non‑condensing humidity up to 95%. This 500‑1000 MHz 500W rf power amplifier supports external enable control and RS485 serial communication via D‑Sub7W2 connector. It is widely adopted for EMC immunity test, jamming simulation and professional test and measurement projects.

Operating Frequency500-1000MHz
RF Output Power @PSAT500W
Power Gain @PSAT57dB
Power Gain Flatness @PSAT±1.5dB
Input Return Loss-10dB
Harmonics @500W-12dBc
Spurious Signals @PSAT-60dBc
In/Output Impedance50Ω
Operating Voltage24-32V
Power add Efficiency30%
DC Current @500W60Amp
Operating Temperature-30-65℃
Storage Temperature-30-65℃
Relative Humidity (non-condensing)95%
Dimensions215x150x25 mm
Weight3 kg