0.4-6GHz 200W High Output RF Power Amplifier Module
ZD-PA-0.4/6G-200W
This 200W wideband rf power amplifier works in two split bands: 0.4–2GHz and 2–6GHz. It runs on 28V DC with CW continuous wave operation, featuring over 65dB small-signal gain and ≥53dBm saturated output power, maximum input power limited at 0dBm and input VSWR below 1.5:1. Equipped with SMA RF input, N-type RF output and D-SUB13W6 power socket, the module supports TTL enable control and real-time over-temperature alarm signal output. Its applicable temperature ranges from -20℃ to +55℃, with dimension 200×250×25mm. External heatsink plus forced air cooling is required for heat dissipation. Widely applied for RF laboratory measurement and various industrial testing projects.
Quantity:
Our200W0.4-6GHz rf amplifier is a high-performance CW rf amplifier module split into two working bands: 0.4~2GHz and 2~6GHz. Powered by 28V DC, this CW rf amplifier module features ≥65dB small signal gain and ≥53dBm output power, with allowable input power ≤0dBm and input VSWR controlled within 1.5:1. Working temperature covers -20℃ to +55℃ to fit most test environments. This 200W0.4-6GHz rf amplifier adopts SMA input and N-K output, matched with D-SUB13W6 power connector. It supports TTL enable switch and over-temperature alarm output for equipment protection. As a reliable CW rf amplifier module, it needs external copper heatsink and forced air cooling for heat dissipation. Compact size 200×250×25mm makes the 200W0.4-6GHz rf amplifier ideal for laboratory RF calibration, wireless product testing and industrial measurement projects.
| Frequency Range | 0.4-2GHz,2-6GHz |
| Small Signal Gain | ≥65 dB |
| Output Power | ≥53 dBm |
| Input Power | ≤0 dBm |
| Input VSWR | ≤1.5:1 |
| Operating Temperature | -20℃~+55℃ |
| Operating Voltage | +28V |
| Operation Mode | CW |
| Input RF Connector | SMA-KFD50 |
| Output RF Connector | N-KFD50 |
| Power Connector | D-SUB13W6 |
