0
image
image
receiver and transmitter module

X-band 8.5-9.6GHz high power transceiver module

ZD-PA-8.5/9.6G
This is an X-band 8.5-9.6GHz integrated transceiver module, combining high-power transmission and low-noise reception functions. The TX path delivers ≥40W pulse output power with a 20% duty cycle, featuring spurious harmonic suppression ≤60dBc and pulse droop ≤0.5dB. The RX path supports 8.5-9.6GHz input, with noise figure <4dB, SPST RF switch isolation ≥60dB, and image suppression ≥60dBc. It includes multi-level protections such as overheat, short circuit, and high voltage/current safeguards, suitable for radar and communication system applications.
Quantity:
Contact Now
add to cart
This high performanceX band8.5-9.6GHztransceiver moduleintegrates an advancedreceiver and transmitter moduledesign, delivering comprehensive bidirectional signal processing capabilities. Thetransceiver modulefeatures a high-powertransmittersection with output exceeding 40 watts, supporting pulse input with a 20% duty cycle and precise pulse control. Thereceiversection delivers exceptional low noise performance with NF X bandtransceiver moduleensures reliable operation in demanding environments. Integrated with flexible IF attenuation control and high linearity, thisreceiver and transmitter modulemeets the strict requirements of radar and professional communication systems.

Power characteristic

Indicator parameters

model

X-bond 8.5/9.6

TX

frequency range

8.5-9.6 GHz

Input signal type

pulse

Input pulse width range

0.1 us~200us

duty cycle

20%

Input drive

-5~+5dBm

The output power of N-type connector

≥40 watts

Maximum pulse width of pulse droop

≤0.5 dB

spurious harmonic

≤60 dBc

Group delay variation in IF bandwidth

protect

Protection must be implemented for maximum duty cycle and open antenna port conditions (VSWR=∞), with no time constraints.

Backpressure, High Voltage, High Current, and Short Circuit Protection

overheat protection

RX

Input RF frequency

8.5-9.6 GHz

noise factor

maximum input power

10W

RF switch

SPST-60dB isolation

Enter P1dB

-10dBm (when the gain is 20dB)

LO to if leakage

-60dBc

acquire

20-60 decibels

intermediate frequency attenuator

31.5 dB 0.5 dB step (controlled by Rs422)

output P1dB

10±1 dBm

frequency gain flatness

±1 dB

spurious harmonic

≥70 dBc

spur

Input port load ≥100 dBc

image suppression

≥60 dBc