High Reliability and Ruggedness 4200-5460MHz 50W Power Amplifier
At the heart of this 50W power amplifier lies its precision VSWR module, maintaining a tight ≤1.6 voltage standing wave ratio to optimize energy transfer while minimizing reflections across the entire band. The low spurious amplifier design achieves ≤1.5dB peak-to-peak in-band fluctuation, delivering flat frequency response for consistent performance in radar, satellite, or 5G backhaul applications. Its 47±1.5dB customizable gain (adjustable via embedded RS485 control) allows fine-tuning for diverse deployment scenarios, from fixed infrastructure to mobile platforms. The amplifier with temperature protection incorporates real-time monitoring through a 4-pin communication interface, providing feedback on operational metrics including downlink power detection (≥20dB dynamic range) and temperature sensing (≤3℃ error). Constructed in a lightweight aluminum housing (220×118×27mm), this 50W power amplifier balances durability with efficient heat dissipation, rated for continuous operation in extreme environments (-40°C to +55°C). The VSWR module's robust performance is further enhanced by its M4.0 feedthrough capacitor power input and hybrid SMA/N-type RF ports (configurable as ANT IN/OUT), while M2.5 through-core switching enables remote activation with 2.5V high-level control. As a low spurious amplifier, it exceeds industry standards for spectral purity, making it ideal for EMI-sensitive installations where regulatory compliance is paramount.
The 50W power amplifier's intelligent firmware supports advanced features including descending road decline control and outflow rate monitoring via RS485, enabling seamless integration into automated systems. Its 32V DC supply (≤20A current draw at full power) ensures compatibility with standard industrial power systems, while the M4 mounting holes simplify mechanical fixation. Whether deployed in military communications, aerospace telemetry, or commercial wireless networks, this amplifier with temperature protection delivers reliable performance through its fail-safe architecture - automatically restarting after fault resolution without manual intervention. Engineered for mission-critical applications, this VSWR module-optimized amplifier sets a new benchmark for low spurious amplifier designs, combining 47dB peak gain with exceptional stability. The 50W power amplifier's combination of aluminum alloy shielding and temperature-protected PA stages ensures consistent operation even in high-vibration environments. From its ≤1.5dB in-band ripple to its automatic output alarm system, every aspect is tailored for engineers who prioritize signal fidelity and system resilience.
For applications demanding uncompromising power efficiency and spectral cleanliness, this low spurious amplifier represents the optimal balance of performance and protection. The 50W power amplifier's ability to maintain ≤1.6 VSWR under full load, coupled with its embedded thermal management, makes it equally suitable for continuous 24/7 operation or pulsed transmission scenarios. With customizable gain profiles and remote monitoring capabilities, this amplifier with temperature protection redefines expectations for high-power RF amplification in the C-band spectrum.
Item name | Technical parameters | Remarks |
Frequency band (MHz) | 4200-5460 | |
Max. output power (dBm) | ≧47 | |
Max. gain(dB) | 47±1.5 | customizable |
In-band fluctuation(peak-to-peak) (dB) | ≤1.5 | |
Spurious emissions | 9kHz~1GHz≤-36dBm | RBW= 100kHz |
1GHz~12.75GHz≤-30dBm | RBW= 1MHz (excludingSEM test band) | |
VSWR | ≤1.6 | |
Supply voltage(V) | 32V | |
Working current (A) | ≤20A@full power | |
Working temperature(℃) | -40~+55 | |
Power supply interface | M4.0 feedthroughcapacitor | |
RF port | ANT IN ->ANT input port:SMAANT OUT->ANT outputport: N | customizable |
Switch control | M2.5 through-corecapacitor: high level turnson; low level turns off | The high level voltage is2.5V |
Output open circuit alarm | M2.5 feedthroughcapacitor: high level open circuit alarm | |
Communication monitoring | 1*4Pin 2.5 pitchPin 1: A;Pin 2: GND ground;Pin 3:B;Pin 4: NC; | |
Temperature detectionerror | ≤3℃ | |
Downlink output powerdetection | ≥20dB,(P0+2-P0-18) | |
Open circuit protection | VSWR>2.5 dB,PA switchoff, f, the indicator light willalarm, and restart torecover | automatic |
Overheating protection | ≥90°C switch on, ≤65°Cswitch off | automatic |
embedded software environmen | Fully connected to RS485;ability to control actualtemperature, outflow rate, descending road declinecontrol | |
Material | aluminum | |
Size(mm) | L220*W118*H27 | reference |
Installation fixed holespacing size | M4 |