High Power Wide Band 50W 500-2700MHz Linear Amplifier
A significant advantage of linear amplifier over ordinary modules is their significantly reduced power consumption and cost. Traditional optical modules or wireless modules usually contain digital signal processing (DSP) chips, which not only increase the power consumption of the module, but also increase the cost. By eliminating these traditional digital signal processing steps, power amplifiersignificantly reduce power consumption.
Since thelinear power amplifier omits the digital signal processing and clock data recovery process, the signal transmission path is shortened and the delay is significantly reduced. This is especially important for devices and applications that require low latency, especially in high-performance computing and data center environments.
In addition to low latency,linear amplifiers simplify maintenance. While troubleshooting traditional modules often requires shutting down the entire system and replacing the entire board, the pluggable design of linear modules allows for efficient replacement without shutting down the system. This not only improves maintenance convenience, but also simplifies fiber cabling and equipment maintenance processes.
The frequency range of thispower amplifier is 500-2700MHz, and customers can flexibly customize it according to the conditions of local operators. The module has an output power of 50W, an impedance of 50 ohms, is equipped with an N-type connector, and is equipped with cooling facilities to better protect the module and extend its service life.
In addition,linear power amplifierprovide the linear technology required for one-stop high-speed assembly automation and various process automation. Due to its compact modular system design, all types of PA modules can be combined into a complete system to achieve an efficient and flexible application experience. This enables linear amplifiers to not only significantly improve technical performance, but also provide greater flexibility and convenience in practical applications.
Working Frequency | 500-2700MHz |
Output Power | 50W |
Gain | 47dB |
Gain Flatness | ±1.5dB |
IMD3 | -26dBm |
Output I.C.P | +53.0dBm |
Operation Mode | Class A |
Impedance | 50Ω |
Input Return Loss | 9.5dB (min.) / VSWR : 2.0 (max.) |
Output Return Loss | 9.5dB (min.) / VSWR : 2.0 (max.) |
AC Supply Input | AC100V±15% / 1φ, 50 / 60Hz, 300VA |
Maximum RF Input Power | +3.0dBm |
Connectors | RF-IN N-Female |
RF-OUT N-Female | |
Cooling | Forced Air Cooling |
Protection Circuits | Over Temperature Protection |
Power Supply Voltage Protection | |
Operating Temperature | 0℃ to +40℃ |
Storage Temperature | -15℃ to +65℃ |
