High Power 200W RF Amplifier with White Noise Source for 700-900Mhz
ZD-PA-700/900M-200W
This 700-900MHz 200W RF power amplifier integrated white noise module is a multi-carrier high-power test device with typical saturated output power of 200W, adopting Gaussian white noise for interference signal modulation. Compact and lightweight (max 2kg), it features instant ultra-wide bandwidth and 50-ohm matched output, with built-in control and protection circuits. It provides over-temperature, over-voltage and over-current alarm functions and auto-shutdown under abnormal conditions. Powered by +28VDC, it achieves gain flatness ≤±1.5dB and spurious signals ≤-12dBc. Operating from -30℃ to 55℃, it equips N-K RF output and D-Sub7W2 hybrid connector for TTL enable and serial communication, widely applied in RF interference simulation and anti-interference testing of wireless devices.
Quantity:
This 700-900MHz 200W jammer module is an integrated rf power amplifier with white noise, developed for multi-carrier high-power RF interference testing, with typical saturated output power of 200W and Gaussian white noise as interference modulation signal. Compact and lightweight with max weight of 2kg, this 200W jammer module delivers instant ultra-wide bandwidth and 50 Ohm matched output, equipped with complete built-in control and protection circuits. Powered by +28VDC, this rf power amplifier with white noise features gain flatness within ±1.5dB and spurious signals below -40dBc. It triggers auto-shutdown via over-temperature, over-voltage and over-current alarm protection. It works stably from -30℃ to 55℃, storage temperature ranges -40℃~65℃ with 95% max non-condensing humidity. It adopts N-K female RF output and D-Sub7W2 hybrid connector for TTL enable and serial communication. This 700-900MHz 200W jammer module is widely used in wireless anti-interference test, EMC verification and signal suppression simulation.
| Operating Frequency | 700-900MHz |
| RF Output Power | 200W |
| Power Gain Flatness | ±1.5dB |
| Harmonics | -12dBc |
| Spurious Signals | -40dBc |
| Output Impedance | 50Ω |
| Operating Voltage | 28V |
| DC Current | 2A |
| Load VSWR | 3:1 @ all load phase & amplitude continuous |
| Thermal Overload | 85°C ±5°C shutdown |
| Operating Temperature | -30~55°C |
| Storage Temperature | -40~65°C |
| Relative Humidity (non-condensing) | 95% |
| Weight | 2kg |
| RF Connectors Output | N-K, Female/SMA |
| DC Interface Connector | Hybrid, D-Sub7W2, Male |
