0
image
image
image
image
wideband power amplifier

Custom Wideband RF Amplifier 500-2500MHz 100W Power Amplifier Module

ZD-PA-500/2500M-100W
With advanced Gallium Nitride on Silicon Carbide technology attached to a copper sub-carrier, the Wide Band 500-2500-100W is a versatile amplifier that caters to various wireless communication systems. Operating in the frequency range of 500-2500MHz, this general-purpose amplifier boasts improved thermal handling through patented technology, promoting reliability and efficiency. It is fit for applications, including satellite communication, wireless LAN/CPE, and cellular systems. The amplifier delivers up to 100W of output power while maintaining stable and predictable performance. Cost-effectiveness and high-performance are assured for customers who choose the Wide Band 500-2500-100W.
Quantity:
Contact Now
add to cart
    This Wide Band RF Power Amplifier 500-2500MHz 100W Power Amplifier Module is a Custom Wideband RF Amplifier.
    It works in the 500 - 2500MHz frequency band and belongs to the 500-2500MHz RF Power Amplifier ​​, which can be widely adapted to a variety of RF application scenarios. It has a strong power amplification capability and is a 100W RF Amplifier Module , with a maximum output power of 50±1dBm, a controllable output power of 100W, and a gain of up to 50±1.0dB, belonging to the Wideband Power Amplifier 50dB Gain product.
    In terms of performance, the in-band fluctuation is controlled at ±2dB, and the input and output voltage VSWR are both ≤1.50, ensuring stable signal transmission. The operating voltage is 32V, the operating current is ≤12A, and the power supply requirement is ≥8A @ + 30Vdc. It uses 7W2 power supply and control interface, and has functions such as temperature detection and power detection.
    RF output uses N-F Connector, which is convenient and reliable to connect. The module size is 170*94*26mm, and it has temperature compensation, over-temperature and standing wave protection functions. The LED module indicator can intuitively display the power supply, power operation and standing wave alarm status, which is convenient for users to monitor the operation of the equipment in real time.

Test items

Specs

Remark

Frequency

500-2500MHz

Operating voltage

32V

Maximum output power

50±1dBm

Operating current

≤12A

Controllable output power

100W

Gain

50±1.0dB

In-band fluctuation

±2dB

peak

Maximum allowable input power

≥+10dBm

Duration 1min without damage

Input voltage VSWR

≤1.50

Add +28V, standard network output -10dBm

Output voltage VSWR

≤1.50

Without power, standard network output -10dBm

≤1.50

Power up, dual directional coupler test

High and low temperature test

Working environment temperature

-10～+55℃

Low temperature can start, monitoring work normally

Gain Stability

±1.5dB@-10℃~+55℃

Power Stability

±1.5dB@-10℃~+55℃

Power supply requirement

≥8A @+30Vdc；

continuous wave output 100W

Power supply, control interface 7W2

A1:VCC+28V;      A2:GND

1: TEMP_AL:Temperature detection AD   Voltage value

2: RUN:  Forward power detection AD  Voltage value

3: VSWR_AL: standing wave alarm, high level alarm, low level cancellation.

4: PA_EN :  enable switch; high level 3V~5V on, low level

5: PA_ADJ:Power regulation input 0~5V voltage, 0V attenuation max, 5V no attenuation

RF output connector

N-F

Module Dimension

170*94*26mm

Module protection

Temperature compensation, over-temperature protection, standing wave protection

LED module indicators

POWER: power indicator, RUN: power operation indication, VSWR: standing wave warning indication