1550-1690MHz 10W power amplifier with VCO signal source module
10W Power amplifier with VCO signal source module
Model:ZD-PA-1550/1690M-10W
RF technical parameters:
Test Item | Indicator | Remarks |
PAfrequency | 1550-1690MHz | |
Bandwidth range | 140MHz | |
Maximum output power | 40±0.5dBm | |
operating voltage | 28V | 24-28V |
Operating current | 1A | @10W typical |
In-band fluctuation | ±1dB | Lasts for 1 min without damage |
Inputand Outputvoltage standing wave ratio | ≤1.5 | |
Power stability | ±1dB@-20℃~+85℃ | |
RF output connector | SMA-50KFD | |
Operating temperature | -20℃~+85℃ | |
Module Dimension | 81*45*16mm | |
Module protection | over-temperature protection, standing wave protection | |
Control switch (feedthrough capacitor) | 3.3V/5V: ON, 0V: OFF | |
Input Signal source | Built-in high-speed noise modulation signal source | |
Power Supply Input(feedthrough capacitor) | VCC+28V; GND | |