Ultra Wideband 600-6200MHz 100W Power Amplifier + DDS Signal Generator Integrated Module with Heat Sink and Cooling Fan

ZD-DPAG-600/6200M-100W

This Ultra wideband 600 - 6200MHz 100W power amplifier + DDS Signal generator integrated module integrates power amplifier and DDS signal generation functions. The operating frequency band is 600 - 6200MHz, the power output is 10W - 100W, which can be set by software, and the gain is 50±1.0dB. It has a complete alarm mechanism, such as over-temperature, over-current, etc. It is equipped with a heat sink and a cooling fan to ensure stable operation. It has an LCD display, 3 LED lights to indicate the status, and communicates via RS485. It is a high-performance RF module that meets various signal processing needs.

Quantity:

Contact Now

add to cart

Request Content

Project Country

Contact Name

Contact Phone

Company Name

600 - 6200MHz Ultra Wideband Power Amplifier and (DDS Signal Generator) Integrated Module, Top Performance
In the field of modern communications and electronic testing, the demand for high-performance signal processing equipment is extremely urgent. Our Ultra wideband 600 - 6200MHz 100W power amplifier + DDS Signal generator integrated module with heat sink and cooling fan is a leader in the industry.

As a device that integrates power amplifier and DDS - generator, it perfectly combines power amplification and signal generation functions. Its ultra-wideband characteristics, covering the 600 - 6200MHz frequency band, are excellent wide band signal generator and signal source. Whether it is precision testing in scientific research institutions or signal optimization in communication companies, it can easily handle it.

As an RF module, it is not only an ultra wideband power amplifier, but also a stable and reliable 700 - 6000MHz power amplifier. It can achieve 10W - 100W controllable output power, gain of 50±1.0dB, and in-band fluctuation ≤2.5dB, ensuring accurate and stable signal amplification. Built-in heat sink and cooling fan ensure stable operation in -10~ +65℃ environment.

Rich monitoring and control functions, such as over-temperature, over-current, standing wave ratio and other alarm mechanisms, as well as convenient parameter query and setting, provide users with all-round use protection. Choosing this integrated module means choosing advanced technology and excellent performance, providing a one-stop solution for your signal processing needs.

Item				Parameter	Unit	Remarks
Operating Voltage				28	V	24-30V
Conversion efficiency				≥42%	%	@100W typical
Controllable output power				10W~100W	W	Software set power level
ALC power adjustment range				≥30	dB	Voltage Controlled Attenuation
gain				50±1.0	dB
In-band fluctuation				≤2.5	dB	peak-to-peak
spurious emission	In working band			≤-15dBm/1MHz	dBm	Measured when the center frequency plus CW signal to the maximum output power
	out of work band		9KHz~1GHz	No higher than normal noise floor clutter	dBm
			1G~12.75GHz		dBm
Maximum allowable input power				≥+10dBm	dBm	Lasts 1min without damage
Input VSWR				≤1.35		Add +28V, standard network output -10dBm
Output VSWR				≤1.30		No power, standard network output -10dBm
				≤1.35		Power On, Dual Directional Coupler Test
High and low temperature test		Working ambient temperature (℃)		-10～+65	℃	Low temperature can start, monitoring works normally
		Gain Stability		±1.5 @-40℃~+65℃	dB
		power stability		±1 @-40℃~+65℃	dB
Power Requirements				≥8A @+28Vdc		CW output 100W
Power supply interface, monitoring interface RS485				7W2		Male
RF output connector				N-F connector
LCD liquid crystal display				Display frequency, power, switch status
with 3 LED lights				POWER: Power indication; RUN: Running indication; ALARM: Alarm indication;
Built-in cooling fan				Modules can be run separately
physical dimension				255x165x80mm
Weight				3.5Kg
Appearance (how to use)				Green integrated module with fan (single or portable use)

2. Module software settings

Monitoring		Function Description	Remarks
Amplifier part setting parameters	Amplifier switch	Turn the amplifier on or off
	Alarm switch	Enable and disable the alarm function
	Downlink Power Control	The maximum output power of the power amplifier can be set, the adjustment range is ≥20dB, and the high, medium and low power levels can be set
	Amplifier over temperature alarm	The high temperature power amplifier shutdown threshold can be set, the power amplifier temperature exceeds 85 degrees, it will automatically shut down; 65 degrees will automatically restore
	Amplifier overpower alarm	The actual power value is 2dB higher than the downlink ALC start control threshold and close
	Power amplifier standing wave alarm	When the standing wave detection of the power amplifier is greater than 4, the power amplifier is automatically turned off
	Amplifier overcurrent alarm	When the detection current of the power amplifier exceeds 12A, the power amplifier is automatically turned off
	Amplifier under-power alarm	When the power amplifier detection power is less than 37dBm, an under-power alarm is displayed
	Amplifier overvoltage alarm	When the power amplifier voltage exceeds 32V, the power amplifier will automatically shut down
Amplifier part query parameters	Amplifier switch status	If the power amplifier is set to"OFF", the query should be the state of the power amplifier off; otherwise, the state of the power amplifier will be turned on.
	Downstream output power level value	Detect power amplifier output power value, detection range (Pomax+2, Pomax-20)	Detection accuracy:Pout±1dB
	Downward standing wave ratio	The standing wave is normally 1.2, when the load is mismatched, the query value is 4.0
	temperature query	Detect the internal temperature of the module, detection range: -40℃～+100℃	detection error：±3℃
	ALC value query	The displayed value is equal to the actual set ALC value
	Voltage detection	Detection module working voltage
	Current Detection	Detection module operating current
Signal generator settings	Frequency setting mode 1	Any single frequency point setting within the range	The frequency setting accuracy is 1M, the maximum frequency bandwidth is100M, and the maximum is 6G
	Frequency setting mode 2	Set the broadband frequency sweep mode, parameters such as frequency, interval, and step can be set
	Frequency setting mode 3	Set any 4 sub-frequency segments within the bandwidth, and a single sub-segment needs to be incremented
module communication		RS485
Interface definition		+:28V,-: GND; control bit 1:485A,2：485B

Recommend Products