6-18GHz 100W Broadband RF Power Amplifier with Software Remote Monitor
ZD-PA-6/18G-100W-1
This broadband RF power amplifier covers 6–18GHz operating frequency, providing CW output power up to 100W with 50dB typical gain and ±2dB in-band power flatness. It is equipped with an RS485 communication port, supporting remote temperature reading, status monitoring and power on/off control via PC software. Integrated over-temperature and output open-circuit protection circuits guarantee reliable performance, with harmonic suppression ≤-15dBc, spurious suppression ≤-70dBc and 1.5:1 VSWR. Powered by +28V DC and consuming less than 1000W max, the unit adopts T2 copper structure and weighs under 3kg. It comes with SMA RF input & coupled ports and N-type high-power output, working stably from -40℃ to +55℃ for microwave testing, EMC and radar development.
Quantity:
This 6-18GHz 100W broadband amplifier is a professional power amplifier with software remote monitor designed for CW continuous wave signal. It features 50dB typical power gain, ≥50dBm output power and ±2dB power flatness across full band. Equipped with RS485 differential communication pins, this broadband amplifier realizes real-time temperature reading, operating status acquisition and remote enable control through matched PC software. Built-in over-temperature shutdown and output open-circuit protection improve operation safety, with harmonic suppression ≤-15dBc, spurious suppression ≤-70dBc and 1.5:1 VSWR. It runs on +28V DC supply with maximum power consumption ≤1000W, adopting T2 copper main structure and weighing less than 3kg. It includes SMA RF input, N-type high-power RF output and forward coupled port, while an integrated aviation connector unifies power and control signals. Operating temperature ranges from -40℃ to +55℃, this 6-18GHz 100W power amplifier with software remote monitor fits microwave measurement, EMC test and radar application scenarios perfectly.
| Operating Frequency | 6–18GHz |
| Typical Power Gain | 50dB |
| Power Flatness | ±2dB |
| Signal Format | CW |
| Output Power | ≥50dBm |
| Power Consumption | ≤1000W |
| Operating Voltage | +28V |
| Typical Quiescent Current | 2.5A |
| Harmonic Suppression | ≤-15dBc |
| Spurious Suppression | ≤-70dBc |
| VSWR | 1.5:1 |
| Enable | Active at +3V |
| Over-Temperature Protection | Power amplifier supply is shut down when temperature exceeds 95℃ |
| Output Open-Circuit Protection | |
| RF Input Connector | SMA-50KFD |
| RF Output Connector | N-50KFD |
| Forward Coupled Output Connector | SMA-50KFD |
| Dimensions | 180mm*130mm*28mm |
| Weight | ≤3kg |
