High Output Gain 57dB Customized 500W 30-100MHz RF Power Amplifier

With the development and progress of science and technology, various high-rise buildings have been built, residential areas have become more and more dense, and there are more and more wireless devices. The risk of signal interference has become greater and greater, and there is even the risk of illegal flying.

For this reason, ZDTECH has specially launched this500W 30-100mhz RF power amplifier with high wattage and narrow frequency. The 500W power output allows the signal to easily penetrate buildings and remain stable during long-distance transmission. Compared with the 200W module used before, the signal coverage has been nearly doubled, which can better meet customers' needs for modules with wider signal coverage.

The RF portable amplifier module has a gain of more than 57 dB, an output power of 500 W, and a temperature protection mechanism that is triggered when the temperature reaches 80°C. The voltage standing wave ratio (VSWR) of the RF power amplifier module is less than 1.8, and it is equipped with an N-type connector and a control switch to improve protection performance. The power amplifier signal block module operates in an air-cooled manner, works at a voltage of 220 V, has a compact structural design, and has an operating temperature range of - 25°C to +55°C, which is suitable for a variety of fields.

In terms of design, the narrow frequency band design of this500W 30-100mhz RF power amplifier effectively reduces signal interference. Compared with other frequency bands, this RF power amplifier module has less signal interference and significantly improved transmission quality, ensuring the accuracy of data transmission.

When the module is running for a long time, it is usually damaged due to overheating. In order to avoid this situation, ZDTECH has equipped this RF portable amplifier module with a temperature standing wave alarm protection function, which will automatically disconnect when the temperature is too high to protect the power amplifier signal block module from damage. When running at high power for a long time, the module's temperature protection system automatically starts, ensuring the stable operation of the equipment and avoiding equipment failures caused by overheating.