2300-2500MHz High Power White Noise Module 200W Saturated RF Power Amplifier
ZD-PA-2300/2500M-200W
Crafted for wireless signal countermeasure and RF lab calibration, this integrated unit is a dedicated 2300-2500MHz white noise module fitted with a built-in 200W saturated RF power amplifier. Designed with a full 50-ohm matched output port, it delivers stable Gaussian white noise interference signals with controlled spurious and harmonic performance. Running on standard 28V DC 2A input, the unit supports continuous operation under 3:1 VSWR load condition without damage.Equipped with full auto-protection logic for overheat, overvoltage and overcurrent risks, it triggers automatic cut-off at 85°C thermal threshold. The lightweight compact unit adopts N-K female RF output and D-Sub7W2 control connector with TTL enable pin. It maintains stable performance across a wide temperature range, perfectly suited for field signal shielding and wireless device anti-interference testing projects.
Quantity:
This all-in-one RF device acts as a professional white noise module and high-power signal generator, integrating a robust 200W saturated power amplifier exclusively for the 2300-2500MHz frequency band. The core 2300-2500MHz circuit of this 200W amplifier outputs standardized Gaussian white noise module signals, featuring 50Ω fully matched RF ports to ensure steady signal transmission as a reliable lab signal generator. Powered by +28VDC with typical 2A current, the unit delivers ±1.5dB gain flatness, with harmonics below -12dBc and spurious signals suppressed to -40dBc, greatly purifying the output of this white noise module. This 200W power amplifier inside the 2300-2500MHz signal generator comes with comprehensive safety mechanisms: auto shutdown for over-temperature, over-voltage and over-current, plus thermal protection activated at 85°C±5°C. It withstands -30℃~55℃ operating temperature and 95% non-condensing humidity. Compact and light-weight, it uses N-K Female RF output and D-Sub7W2 DC connector with TTL enable pin, widely applied for wireless testing, interference simulation and high-power RF source projects.
| Operating Frequency | 2300-2500MHz |
| RF Output Power | 200W |
| Power Gain Flatness | ±1.5dB |
| Harmonics | ±1.5dB |
| Harmonics | -12dBc |
| Spurious Signals | -40dBc |
| Output Impedance | 50Ω |
| Operating Voltage | 28V |
| DC Current | 2A |
| Load VSWR | 3:1 @ all load phase & amplitude continuous |
| Thermal Overload | 85°C ±5°C shutdown |
| Operating Temperature | -30~55°C |
| Storage Temperature | -40~65°C |
| Relative Humidity (non-condensing) | 95% |
| Weight | 2kg |
| RF Connectors Output | N-K, Female/SMA |
| DC Interface Connector | Hybrid, D-Sub7W2, Male |
