B8 FDD LTE 20W Electronic Fence RF Power Amplifier Modules
Item indicator | Transmitter channel (PA) | Receiver channel (LNA) |
Working Frequency | 925~960MHz | 880~915MHz |
Saturated power output | 43±1dBm | -10±1dBm |
Gain | 50±1dB | 25±1dB |
Gain adjustment range | ≥25dB | ≥25dB |
Gain adjustment step | 1dB | 1dB |
ALC automatic level control | ≥10dB | / |
In-band flatness | ≤2.0dB | ≤2.0dB |
ACPR | ≤-45dBc | / |
EVM | ≤5% | / |
Noise figure | / | ≤1.8dB |
Maximumlossless input | 0dBm | -10dBm |
Out-of-band spurs | 9kHz~1GHz@≤-36dBm/30kHz 1GHz~12.75GHz@≤-30dBm/30KHz | |
VSWR | ≤1.5 | |
Working current/voltage | ≤3.5A/DC+28V | |
Working temperature | -25~+55℃ | |
RF port | PA IN, LNA IN, MCX-KHD for LNA OUT ports; SMA-KHD for PA OUT | |
Connector | 5569 Connector, Pitch 4.2MM, Bent Pin Block 2*3PIN | |
Monitoring interface | Pin 1:RS485A; Pin 2:L/EN(N.C.) Pin 3:P/EN(N.C.); Pin 4:RS485B Pin 5:GND; Pin 6:+28V. | |
Type of monitoring | RS485 monitoring protocol,baud rate 9600/19200 optional(factory default 19200) | |
Amplifier size | 130x110x21mm | |