1550-1620MHz 1171-1371MHz 100W power amplifier with VCO signal source module
100W Power amplifier with VCO signal source module
Model:ZD-PA-1550/1620M-100W
Model:ZD-PA-1171/1371M-100W
RF technical parameters:
Testing Item | Specs | Remark | |
Power Amplifier | Freq(MHz) | 1550-1620 | |
Bandwidth(MHz) | 70 | ||
Max. Output Power(dBm) | 50±1dBm | ||
Operating Voltage | DC+28V | ||
Operating Current | ≤8.5A | @100W | |
In-band Ripple(dB) | ±1dB | ||
Input/Output VSWR | ≤1.5 | ||
Power Stability | ±1dB | @-20~+55℃ | |
Output RF connector | SMA-50KFD | ||
Operating Environmental Temperature | -20~+55℃ | ||
Dimension | 186*94*26mm | ||
Protection | Temp warning, VSWR warning | ||
Switch(feedthrough capacitor) | 3.3V/5V: ON; 0V: OFF | ||
Input Signal Source | Built-in high-speed noise modulation signal source | ||
Power Supply Input(feedthrough capacitor) | 28V power input, GND | ||
Testing Item | Specs | Remark | |
Power Amplifier | Freq(MHz) | 1171-1371 | |
Bandwidth(MHz) | 200 | ||
Max. Output Power(dBm) | 50±1dBm | ||
Operating Voltage | DC+28V | ||
Operating Current | ≤8.5A | @100W | |
In-band Ripple(dB) | ±1dB | ||
Input/Output VSWR | ≤1.5 | ||
Power Stability | ±1dB | @-20~+55℃ | |
Output RF connector | SMA-50KFD | ||
Operating Environmental Temperature | -20~+55℃ | ||
Dimension | 186*94*26mm | ||
Protection | Temp warning, VSWR warning | ||
Switch(feedthrough capacitor) | 3.3V/5V: ON; 0V: OFF | ||
Input Signal Source | Built-in high-speed noise modulation signal source | ||
Power Supply Input(feedthrough capacitor) | 28V power input, GND | ||