100/150/200W PA 700-2700MHz power amplifier
100/150/200W Power amplifier
Model:ZD-PA-700-2700M-100W
Test items | Specs | Remark | |
Frequency | 700-2700MHz | ||
Operating voltage | 30V | 28-32V | |
Maximum output power | 50±1dBm | ||
Operating current | ≤12A | ||
Controllable output power | 100W | ||
Gain | 50±1.0dB | ||
In-band fluctuation | ±2dB | peak | |
Maximum allowable input power | ≥+10dBm | Duration 1min without damage | |
Input voltage VSWR | ≤1.50 | Add +28V, standard network output -10dBm | |
Output voltage VSWR | ≤1.50 | Without power, standard network output -10dBm | |
≤1.50 | Power up, dual directional coupler test | ||
High and low temperature test | Working environment temperature | -10～+55℃ | Low temperature can start, monitoring work normally |
Gain Stability | ±1.5dB@-10℃~+55℃ | ||
Power Stability | ±1.5dB@-10℃~+55℃ | ||
Power supply requirement | ≥8A @+30Vdc； | continuous wave output 100W | |
Power supply, control interface 7W2 | A1:VCC+28V; A2:GND 1: TEMP_AL:Temperature detection AD Voltage value 2: RUN: Forward power detection AD Voltage value 3: VSWR_AL: standing wave alarm, high level alarm, low level cancellation. 4: PA_EN : enable switch; high level 3V~5V on, low level 5: PA_ADJ:Power regulation input 0~5V voltage, 0V attenuation max, 5V no attenuation | ||
RF output connector | N-F | ||
Module Dimension | 162*92*25mm | ||
Module protection | Temperature compensation, over-temperature protection, standing wave protection | ||
LED module indicators | POWER: power indicator, RUN: power operation indication, VSWR: standing wave warning indication | ||
Model:ZD-PA-700-2700M-150W
Test items | Specs | Remark | |
Frequency | 700-2700MHz | ||
Operating voltage | 30V | 28-32V | |
Maximum output power | 52±1dBm | ||
Operating current | ≤17A | ||
Controllable output power | 150W | ||
Gain | 50±2.0dB | ||
In-band fluctuation | ±2dB | peak | |
Maximum allowable input power | ≥+10dBm | Duration 1min without damage | |
Input voltage VSWR | ≤1.50 | Add +28V, standard network output -10dBm | |
Output voltage VSWR | ≤1.50 | Without power, standard network output -10dBm | |
≤1.50 | Power up, dual directional coupler test | ||
High and low temperature test | Working environment temperature | -10～+55℃ | Low temperature can start, monitoring work normally |
Gain Stability | ±1.5dB@-10℃~+55℃ | ||
Power Stability | ±1.5dB@-10℃~+55℃ | ||
Power supply requirement | ≥8A @+30Vdc； | continuous wave output 150W | |
Power supply, control interface 7W2 | A1:VCC+28V; A2:GND 1: TEMP_AL:Temperature detection AD Voltage value 2: RUN: Forward power detection AD Voltage value 3: VSWR_AL: standing wave alarm, high level alarm, low level cancellation. 4: PA_EN : enable switch; high level 3V~5V on, low level 5: PA_ADJ:Power regulation input 0~5V voltage, 0V attenuation max, 5V no attenuation | ||
RF output connector | N-F | ||
Module Dimension | 186*94*26mm | ||
Module protection | Temperature compensation, over-temperature protection, standing wave protection | ||
LED module indicators | POWER: power indicator, RUN: power operation indication, VSWR: standing wave warning indication | ||
Test items | Specs | Remark | |
Frequency | 700-2700MHz | ||
Operating voltage | 30V | 28-32V | |
Maximum output power | 53±1dBm | ||
Operating current | ≤23A | ||
Controllable output power | 200W | ||
Gain | 45±2.0dB | ||
In-band fluctuation | ±2dB | peak | |
Maximum allowable input power | ≥+10dBm | Duration 1min without damage | |
Input voltage VSWR | ≤1.50 | Add +28V, standard network output -10dBm | |
Output voltage VSWR | ≤1.50 | Without power, standard network output -10dBm | |
≤1.50 | Power up, dual directional coupler test | ||
High and low temperature test | Working environment temperature | -10～+55℃ | Low temperature can start, monitoring work normally |
Gain Stability | ±1.5dB@-10℃~+55℃ | ||
Power Stability | ±1.5dB@-10℃~+55℃ | ||
Power supply requirement | ≥8A @+30Vdc； | continuous wave output 200W | |
Power supply, control interface 7W2 | A1:VCC+28V; A2:GND 1: TEMP_AL:Temperature detection AD Voltage value 2: RUN: Forward power detection AD Voltage value 3: VSWR_AL: standing wave alarm, high level alarm, low level cancellation. 4: PA_EN : enable switch; high level 3V~5V on, low level 5: PA_ADJ:Power regulation input 0~5V voltage, 0V attenuation max, 5V no attenuation | ||
RF output connector | N-F | ||
Module dimension | 186*94*26mm | ||
Module protection | Temperature compensation, over-temperature protection, standing wave protection | ||
LED module indicators | POWER: power indicator, RUN: power operation indication, VSWR: standing wave warning indication | ||
