14 Frequency Bands Portable Suitcase Device
1.Technical parameters.
1: Omni-directional antenna range radius 10m-25m for this portable suitcase interference device, depending on the signal field strength of the nearby base station.
2: Wireless communication interference is a portable design, lightweight, convenient for mobile applications such as detonation.
3: output channel single 14 channels,scanner frequencies, RF transmit power 70W, single channel 5W.
4: Shield 2G, 3G, 4G, 5G, wireless remote control, etc. (frequency can be customized);
5: Analog plus noise processing mode;
6: Protection function, temperature alarm and standing wave protection function.
7: Intelligent heat dissipation system, plus fan cooling, can be used continuously on.
8: ZDTECH frequency jammer is built-in 8.4V-30A battery for continuous use greater than 1 hour; External charger.
9: The standard configuration of antenna is omnidirectional antenna, also can be changed according to the need of directional antenna, shielding effect will be better.
10:excellent production technology, main chassis ABS plastic shell.
11:Multiple sets of super cooling fans and super thick cooling teeth, even in high temperature environment can ensure the best working condition.
2.Detailed technical parameters (one of the following frequencies can be selected).
Frequency band parameters | Channel | Signal type | RF Power |
CH1 | 315MHz | 5W | |
CH2 | 433MHz | 5W | |
CH3 | 758-803MHz | 5W | |
CH4 | 861-894MHz | 5W | |
CH5 | 925-960MHz | 5W | |
CH6 | 1805-1880MHz | 5W | |
CH7 | 2110-2170MHz | 5W | |
CH8 | 2620-2690MHz | 5W | |
CH9 | 3400-3600MHz | 5W | |
CH10 | 3600-3800MHz | 5W | |
CH11 | 1222-1232MHz | 5W | |
CH12 | 1565-1609MHz | 5W | |
CH13 | 2400-2500MHz | 5W | |
CH14 | 5150-5850MHz | 5W | |
Mainframe dimensions (L*W*H) | 410*335*205mm(without carrying handle) | ||
Antenna size | Length200mm,Diameter16mm | ||
Antenna type | High Gain omni antenna(14 sticks)，Rod Antenna |
Power supply method | AC:110V~240V,or Built-in battery power |
Power consumption of the whole machine | |
Weight | Kg |
Temperature / Humidity | -20℃-+50℃/≤80% |
Complete machine reliability | MTBF not less than 1000 hours |
System response time | No more than 30 seconds (from power on to system normal operation time) |
Case design | ABS plastic housing |
3.Notes
1: antenna installation notes
- First screw the FRP antenna and the port marked on the mainframe one by one to the mainframe, make sure the connection is firm and stable.
- After power on, please wait for about 1 minute, check the antenna interface again, if you find that the temperature rises abnormally, it may be caused by poor contact between thefeeder cable and the output connector, please power off immediately, unscrew thefeeder cable andconnector, then connect again carefully.
2：Operating Notes：
a. When you receive the machine, please unpack it carefully, check the appearance and accessories, and do not open the machine without necessity.
b. Before powering up the machine, please check that all the antennas are connected and that they are in good contact. It is strictly forbidden to operate the machine without the antenna connected, otherwise there is a risk of damage to the machine.
3：Safety Notes：
a. In rainy weather, do not open the box to avoid short circuit damage caused by rain entering the chassis.
b. When the machine is powered on, do not touch the electrically charged parts during the switch operation to prevent electric shock.
c. When the machine is powered on, the cooling fan is turned on and the blades rotate at high speed, do not touch the rotating blades of the cooling fan with your hands when operating the equipment to avoid injury.
d. The installation of the equipment comes with the corresponding installation accessories, which need to be installed by professional engineers during installation.
